If you’re new to snowboarding or mainly looking to ride the park, it’s better to opt for a softer flex. These will be more forgiving and easier to tweak when doing tricks.
How To Choose A Snowboard, Boots & Bindings Combo 0
Matching your set-up correctly
It’s important that your board, bindings and boots all match your ability level and preferred style of riding.
Your first priority should be to find a comfortable pair of boots. Ex: Burton Highline
Aggressive riders focused on speed, big jumps and quick turns should opt for a stiff boot. These offer more support and more instant response. Ex: Ride Insano boot.
Next up, the snowboard. Don’t judge them purely on looks or price. Again, the crucial factor is flex. Softer models are better suited to learning and tricks – especially rails – whereas advanced riders who are more interested in piste, pipe or powder should look for a stiffer flex.
The final piece of the puzzle is your bindings. If your focus so far is on freestyle then you should opt for a softer model to match the flex of your boots and board. Likewise, rigid bindings featuring aluminium or carbon are a good match for freeride set-ups.
It’s vital that your bindings are compatible with your chosen snowboard. The Burton EST range is designed exclusively for the Burton Channel system; these bindings will not fit on standard 4×4 inserts. On the other hand, most regular bindings featuring disk plates CAN ALSO fit the Channel system if required.
Now that you’ve made a selection, fix the bindings to the board, put on your boots and try strapping into your proposed set-up. Check that the sizing of the binding is correct and that the shape of the straps are a good fit for your boots – you don’t HAVE to buy everything from the same brand, but it’s worth considering matching the binding and boot.
Tune Up Tips: Waxing your Snowboard/Skis 0
New Snowboard or Skis for Christmas? Proper care will help extend the life of your new gear. Here are a few tips for waxing and taking care of your new investment.
How To: Wax your snowboard
- Base cleaner and cloth
- Level work station
1. Clean It Up
The first step is to clean your base. You want to get all that grime off so the wax really takes. You can either use base cleaner and a rag or, to take the more involved route, run a hot iron over the base, apply a thin layer of wax, and scrap instantly. The “hot scrape” technique cleans your base by opening the pores and allowing any muck that might be hiding in there to be pulled out. Keeping your base clean might not be as much of an issue in the winter, but come spring and summer there’s a lot of contaminants in the snow, so a good base cleaning is crucial
2. Loosen Up
It’s a good idea to loosen the bolts on your board. Reason is, the bolts conduct heat when you run the iron over them and then create small dimples in your base. You don’t have to remove them entirely, just loosen them a little so you’re waxing a nice level base.
3. Get To Waxing
This is where you’ve got some decisions to make. First, choose a wax that best suits the conditions (e.g., temperature) you’re shredding in. You can never go wrong with a good all-temp wax. When applying wax keep in mind that your edge is the section of base that takes the most abuse, so it’s smart to use a harder wax along your edges. There are a couple different application techniques, but the idea is the same. You want an even coat of wax across the base.
4. Scrape It
After you’ve waxed your board, set it aside and let it cool for about a half hour or until it’s room temperature. Then get your scraper. Make sure you’re working with a sharp scraper, otherwise you’ll make the process harder on yourself. The most important thing when scraping is to make long smooth strokes. Short choppy scraping will hurt your cause. Keep it smooth, kid.
5. Brush Up
The point of the final brush is to remove any excess wax you might not have hit with your scraper. Don’t be afraid to really put some elbow grease into it, the idea is to expose the structure of your base, because the structure is what moves moisture, which cuts down on suction, and that’s what allows you to really haul ass.
We also offer Tune Up Shop services, feel free to give us a call and bring in your gear!